2 Ton Single Phase Electric Chain Hoist | BCD-2000 Series (110V)
video
2 Ton Single Phase Electric Chain Hoist | BCD-2000 Series (110V)

2 Ton Single Phase Electric Chain Hoist | BCD-2000 Series (110V)

Product Name:Mini electric chain hoist
Lifting capacity:300kg 500kg 1000kg 2000kg(Can be customized)
Liting Speed:12M/min 6M/min 3M/min 5.4M/min 2.7M/min(Can be customized)
Type:G80 Alloy Chain
Send Inquiry
Description

Products Description

 

product-750-468

Product Overview: What This Hoist Actually Solves

If your shop runs on standard 110V/120V wall power and you're tired of wrestling with engine hoists or manual chain falls, this is the unit that bridges the gap. The BCD-2000 is a single phase electric chain hoist designed for the reality of small garages, home workshops, and maintenance bays where 3-phase power isn't an option.

It lifts 2,000 kg (4,400 lbs) at a controlled 2.7 meters per minute. That speed is deliberate-it's not a high-speed warehouse hoist. It's a placement tool. It gives you enough time to guide a heavy engine block or a piece of machinery onto its mounts without panic-bumping the pendant. We see these used heavily for pulling truck axles, setting small bridge sections, and even hoisting heavy lumber in timber-frame shops.

 

product-750-600

Key Features: The Specs That Matter on a Job Site

We've listed these in order of what mechanics and riggers actually ask us about first.

Single Phase Motor with Thermal Cutout: 2,500W (3.3 HP equivalent peak). It pulls about 22 amps on startup and settles around 18 amps under full 2-ton load. That means it will run on a dedicated 30A circuit without tripping the breaker. The winding is pure copper, Class F insulation, which handles the heat of a single-phase motor better than aluminum.

Dual Line Chain Reeving (2 Falls): This is the "X2" you see on the spec plate. The load chain is 7.1mm diameter, Grade 80. Using two falls of chain gives you the 2-ton rating while keeping the motor size manageable on 110V. The chain has been proof-loaded to 50% above the rated capacity and individually calibrated before leaving the factory.

Mechanical Load Brake (Weston Style): This is the safety feature we rely on. It's not just the electromagnetic disc brake that stops the motor. It's a mechanical gearbox brake that holds the load independent of electricity. If power cuts out mid-lift, the load stops exactly where it is-no slow drift.

Control Voltage Reduction: The pendant runs on 48V, not line voltage. This is a small detail that matters when you have greasy hands or a wet floor. You're handling low voltage, which adds a layer of protection against shock.

Cast Iron Gearbox with Oil Bath: This isn't a sealed-for-life plastic unit. It's a heavy gearbox running in 80W-90 gear oil. It's louder than a worm drive hoist (expect about 75-78 dB at full lift), but the lubrication ensures the gears aren't grinding metal-on-metal during long vertical pulls.

Products Details

 

product-1000-2864

product-1000-1000

Structure & Components: Why It Doesn't Feel "Cheap"

When you unbox this hoist, the first thing you notice is the weight. That's the cast iron frame and the thick aluminum motor housing. We don't use plastic housings on the hoist body because in a single-phase setup, the motor vibrates more than a 3-phase unit. The rigidity of the metal frame dampens that vibration, which extends the life of the internal bearings.

Bottom Hook: Forged alloy steel with a heavy-duty safety latch. It swivels 360 degrees with a thrust bearing that actually gets grease ports. Check that bearing every 200 hours of use.

Chain Guide: Nylon composite. It's the one "soft" part, and it's designed to be a wear item. It guides the chain into the pocket wheel silently and prevents jamming if you side-load the hoist (which you shouldn't do anyway).

 

Safety Features: Built for the "Oops" Moments

Overload Clutch: Located inside the gearbox. If you accidentally try to lift 2.4 tons, the clutch slips. You'll hear a distinct clicking/rattle noise. Release the "UP" button immediately.

Limit Switch (Top & Bottom): Mechanical plunger type. It stops the motor before the bottom block crashes into the hoist body or before the chain fully runs out. Crucial for preventing chain wedge damage.

Emergency Stop: Red mushroom button on the pendant. Cuts all power to the hoist motion contactor.

 

Products Parameters

Parameter Specification Note for Buyer
Rated Capacity 2,000 kg / 4,400 lbs Do not exceed. Tested to 125% for CE compliance.
Voltage / Phase 110V - 120V / 1 Phase 50/60 Hz compatible. *Note: Plug is NEMA L5-30P.*
Lifting Speed 2.7 m/min (8.8 ft/min) Single speed only. Smooth start, no jerking.
Motor Power 2,500 W Input 2.2 kW Output to gearbox.
Load Chain 7.1 mm x 2 Falls Grade 80, Zinc Plated. Breaking strength > 5,000 kg per fall.
Standard Lift Height 6 m (19.6 ft) Distance between hook saddle and bottom block fully closed.
Duty Cycle S3 - 25% ED 25% run time per hour. (e.g., 15 min lifting, 45 min cooling).

 

Shipping & Packaging

 

product-1000-994

product-1000-1130

Packaging & Delivery (For E-Commerce Buyers)

Packaging: We ship these in a reinforced plywood crate, not cardboard. The hoist is bolted to a wooden pallet base and wrapped in a VCI (Volatile Corrosion Inhibitor) bag to prevent rust during ocean freight.

Lead Time: In-stock units ship from our US warehouse within 1 business day. Custom voltage/length units require 7-10 days prep.

Shipping Method: LTL Freight. Liftgate service is included because the crate is heavy. We'll email you the BOL and tracking as soon as the truck is loaded.

 

Installation & Setup: What to Expect

Time Estimate: 45 minutes if your beam is ready.
Support Required: The hoist weighs 150 lbs. You need a second person or a temporary chain block to hang it.
Modular Mounting: The top hook is removable. It bolts to a standard lug mount. If you have a trolley (manual or electric), you can unbolt the top hook and bolt the hoist body directly to the trolley plate.
Electrician Note: This is not a plug-and-play device for a standard 15A wall socket. You must run a dedicated 30A breaker and 10-gauge wire. We include wiring diagrams with the manual, but if the term "contactor" is new to you, call a licensed electrician.

 

Applications: Where This Single Phase Model Shines

Auto & Truck Repair: Pulling diesel engines (Cummins, Powerstroke) and transmissions. With a 6m lift height, you can clear the cab of a lifted truck on a 2-post lift.

Farm & Ranch Maintenance: Operating in a pole barn with a single 110V outlet. Use it with a manual trolley on an I-beam to move feed augers or PTO shafts.

Machine Shop: Positioning heavy vises or rotary tables on a mill. The precise inching ability of the 2.7 m/min speed is better here than a faster 3-phase hoist.
 

FAQ

Q: Does the chain hang straight or is it stiff from the factory?
A: The chain comes with a heavy preservative oil. Wipe it down with a rag and WD-40 before first use, otherwise, it will be stiff and kink slightly in the bag. After 3-4 full lifts, the links loosen up perfectly.

Q: Is this hoist loud?
A: Yes, compared to a 3-phase electric hoist. Because it's single phase, there is a 60Hz hum from the motor stator. The gear mesh is audible. It's not silent. If you need a quiet operating room, this isn't the right tool.

Q: Can I use an extension cord?
A: Strongly advised against. Voltage drop on a 110V line is severe under 2,500W load. If you must, use a 10 AWG cord no longer than 25 feet. A thin cord will burn out the start capacitor in under a month.

Q: What is the warranty on the BCD-2000?
A: 12 months on the motor and gearbox. 6 months on wear items like the pendant cable and chain guide. We keep full inventory of spares in the US, so if a contactor fails in year 2, you can buy the part individually without scrapping the hoist.

Q: Does this come with a beam clamp or trolley?
A: No. This listing is for the hoist only with a top hook. If you need a manual push trolley to fit a specific beam flange width, check our "Accessories" section for the matching RVB Trolley Series.

 

If you've read this far, you're likely the person in the shop who actually has to rig the heavy parts. This hoist solves the power problem without sacrificing the safety features of a full industrial unit. Click "Contact Us " or give us a call if you need to confirm the breaker size for your specific panel. We'll answer the phone.

 

Hot Tags: 2 Ton Single Phase Electric Chain Hoist | BCD-2000 Series (110V), China 2 Ton Single Phase Electric Chain Hoist | BCD-2000 Series (110V) manufacturers, suppliers, factory, overload protection handling electric chain hoist, gearbox electric chain hoist, chain operation electric chain hoist, offline sale of electric chain hoist, floor operation electric chain hoist, push button handling electric chain hoist

Send Inquiry

(0/10)

clearall