European Style Single Girder Overhead Crane 10 Ton Capacity
video
European Style Single Girder Overhead Crane 10 Ton Capacity

European Style Single Girder Overhead Crane 10 Ton Capacity

Product Name:Overhead crane
Type:China type/European type
Lift Capacity:1-30ton(Can be customized)
Lift Span:1-20m(Can be customized)
Send Inquiry
Description

Products Description

 

product-1920-700

Product Overview: A Lighter Beam That Lifts More

The "European Style" designation isn't just marketing fluff. It refers to a specific design philosophy: low headroom and high hook approach.

The Rayvanbo EKKE Series 10 Ton Single Girder Crane uses a box-welded girder that is roughly 30% shorter in height than a comparable American-style W-flange beam crane. Why does that matter? Look up at your building columns. If you have a 20-foot eave height, a standard crane beam steals 24-30 inches of that space. The EKKE girder gives you an extra 6 to 8 inches of lift height. That's the difference between clearing a tall die rack and having to unbolt the top half of the machine you're moving.

This system is designed for manufacturing bays, press rooms, and maintenance facilities where you're running a 10-ton wire rope hoist and you want the trolley to glide, not grind.

product-800-869

Key Features: The Engineering Behind the Slim Profile

We've installed these in plants from Ohio to Ontario. Here's the feedback from the rigging crews.

Box Section Girder with Internal Diaphragms: The main beam is formed from high-strength Q355B steel plate. The inside isn't hollow-it has vertical stiffeners every 500mm. This prevents the web from buckling under the 10-ton trolley wheel pressure. The weld seams are 100% ultrasonic tested (we keep the reports if your insurance inspector asks).

FEM/DIN Wheel Blocks: This is the core of "European Style." The end trucks use machined spherical roller bearings pressed into forged steel wheels. There's no exposed shaft like you see on old top-running cranes. The entire gearbox is sealed inside the wheel block. The result? Starting force is 40% lower. You can push a 10-ton crane by hand if you have to.

Torsion-Resistant Runway Beams: The cross-travel rails are capped with square bars (not round rail). The trolley wheels have a mating groove. This geometry prevents the trolley from climbing the flange during a fast cross-travel acceleration.

Low Maintenance Braking: The long-travel drives use conical rotor brake motors. No separate thruster brake to adjust. When power cuts, the spring-loaded rotor slams the brake pad closed. It's a crude but brutally effective system that survives dusty foundry environments.

 

Products Parameters

 

Parameter Specification On-Site Note
Safe Working Load (S.W.L.) 10,000 kg / 22,000 lbs Test load applied at 125% for static test.
Span (Hook Coverage) Custom 7.5m - 25.5m We measure column-to-column center. Wheel base approx 1/6 of span.
Lifting Height 6m / 9m / 12m (Standard) Measured from floor to hook saddle fully raised.
Cross Travel Speed 5 / 20 m/min (Dual Speed) VFD controlled standard on trolley traverse.
Long Travel Speed 8 / 32 m/min (Inverter Duty) Soft start protects gearboxes from the 10-ton inertia.
Hoist Type Rayvanbo Electric Hoist 4/1 Rope Reeving. 6:1 design factor on rope.
Wheel Material GGG70 Ductile Iron Hardness > 190 HB. Profiled for A55/A75 Rail.
Crane Weight (Dead Load) Approx 4,800 kg (25m span) Significant weight reduction vs. standard girder.
Power Supply 3-Phase / 380-480V / 60Hz Festoon flat cable or Enclosed Conductor Bar.

Products Details

 

product-1009-2619

Product Details:

1.Simple construction: the main beams of single-girder crane bridge frames are mostly made of I-shaped steel or a combination of steel and steel plates.

2.Progress steadily: it has the advantages of compact size, low building clearance height, light self-weight and small wheel pressure.

3.Esay for installation: a wide variety of specifications and models, simple installation, easy operation and maintenance, and high efficiency.

4.Reliable performance: Rigid structure guarantee, precise track guidance, mature drive and control, and smooth operation.

 

Products Application

 

product-1000-1254

Applications: Where This Crane Earns Its Keep

Metal Service Centers: Loading/unloading 20ft bars of 4" plate. The dual-speed cross travel (5/20 m/min) allows the operator to creep into the plate rack without slamming the forks.

Precast Concrete: Stripping 10-ton forms. The smooth VFD long travel prevents the concrete piece from swinging and cracking before it's fully cured.

Heavy Equipment Repair: Pulling engines from large mining trucks. The low headroom design lets you work closer to the shop ceiling.

 

Shipping & Packaging

 

product-1200-1200

product-1200-1200

product-1000-1000

Packaging & Delivery

Export Packaging: The girder is wrapped in black polyethylene film with VCI rust inhibitor powder. The end trucks are bolted to custom steel shipping stands inside a 20ft or 40ft Open Top Container.

Transport: FOB Shanghai / Ningbo. We handle the lifting plan to get the 10-ton girder out of the container at your site (we need a telehandler or crane on site to offload).

Lead Time: 20-25 working days for fabrication and testing. Add 30-40 days for ocean freight to US East/West Coast.

 

Customization (OEM & Special Requirements)

We don't just sell "a crane." We sell a lift system matched to your building.

Span Adjustments: Any width from 7.5m to 25.5m. Over 25.5m, we recommend a Double Girder.

Hoist Brand: Standard is Rayvanbo ER2. We can interface with Kito, Stahl, or Demag hoists if you have a preferred vendor lock.

Power Feed: Busbar (Conductor Bar) is cheaper for long bays. Flat Cable Festoon is cleaner for paint booths.

Corrosion Protection: Standard is RAL 1028 (Melon Yellow) Polyurethane Topcoat. We offer C5-M Marine coating for water treatment plants and coastal facilities (salt spray resistance).

 

FAQ

 

Q: I already have a building. I'm worried this European style beam won't fit my existing American runway rail. Is this going to be a custom nightmare?
A: This is the #1 question we get from plant managers replacing a 30-year-old crane. The EKKE end trucks are machined to run on standard ASCE rail profiles (usually A55, A65, or A75). If you have a flat bar runway or an inverted W-beam, we just swap the wheel material from ductile iron to polyurethane to match the tread. It's a $200 adjustment, not a $20,000 building modification. We ask for a photo of your runway rail profile and we match it before the crane ships.

 

Q: What's the real cost of ownership? I've bought cheaper cranes before and got burned by downtime and gearbox leaks.
A: Let's be blunt: A cheaper crane uses open-gear long travel drives with exposed bearings. You'll be greasing those every 40 hours of run time, and the grease drips on whatever is below. The EKKE uses sealed, oil-bath gearboxes in the wheel blocks. You change the oil every 5,000 operating hours. That's once every two years in a two-shift plant. The only weekly maintenance is wiping the rail clean and checking the wire rope for bird-caging. If your maintenance team is stretched thin, this is the crane you want.

 

Q: I'm buying this for a steel warehouse. We unload trucks hard. How do I know the 10-ton rating isn't just a "marketing number" that'll fail after a year of shock loads?
A: The "10t" stenciled on the beam is the Safe Working Load. The design load is higher. The hoist's mechanical brake is rated for dynamic braking-meaning it stops 10 tons descending at full speed without fading. The end trucks are welded with a safety factor of 5:1 against yield. That means if you accidentally bump the end stop with 10 tons swinging, you'll dent the buffer, not shear the bolts off the building column. We also include the Static Load Test Certificate with every shipment. Your insurance guy will want to see that.

 

Q: My electrician is already overworked. How much of a headache is the electrical hookup? Does this thing play nice with older plant power?
A: This is the part where we save you money on electrician overtime. The control panel comes pre-wired to the hoist and bridge motors with military-style circular connectors. You literally plug the pendant in, plug the festoon cable in, and land the main feeder wires (L1, L2, L3, Ground) to the disconnect switch. That's it. It takes an industrial electrician about 2 hours from uncrating to power-on. If your plant voltage is "dirty" or fluctuates, the VFDs in the panel have line reactors built-in to smooth it out so you don't fry a drive board on day one.

 

Q: I'm comparing you to a local crane builder. They're more expensive, but they're 50 miles away. What's the service story if something goes wrong on the Rayvanbo?
A: Fair point. You can't drive to Rayvanbo HQ in an hour. Here's our counter: 90% of crane downtime is electrical contactor failure or pendant cable damage. We ship those spares DHL Express at our cost during the warranty period. We also provide a full electrical schematic and parts breakdown with the manual. Any decent industrial electrician can diagnose a fault using the error codes on the VFD screen. If it's a major structural issue (which we've seen twice in 5,000+ installations), we fly an engineer out. But honestly, that's not where you spend money. You spend money on local riggers for rope changes. We give you the rope specs so you can buy the wire rope locally and have a local rigger install it.

Hot Tags: European Style Single Girder Overhead Crane 10 Ton Capacity, China European Style Single Girder Overhead Crane 10 Ton Capacity manufacturers, suppliers, factory, lifting crane system, crane installation service, crane maintenance, crane price, crane height, crane wheels

Send Inquiry

(0/10)

clearall